Panasonic PT-L6500U Service Manual page 37

the move of the LCD panel, adjust the convergence observing the
real projected picture carefully.
3. Use a hexagon head wrench, tighten the 2 screws to secure the
bracket (LCD panel).
Note:
Be careful not to move the bracket when tighten the screws.
9.4.2. Adjustment after Every LCD Panel or LCD Block Replacement
1. Display the green crosshatch pattern according to the chapter 4
"Service Mode" and adjust the lens focus.
2. Adjust the LCD panel (G) position to place the center position of
the crosshatch pattern to the center on the screen.
3. Correct the tilt of the green crosshatch pattern.
4. Display the white crosshatch pattern according to the chapter 4
"Service Mode".
5. Adjust the LCD panels (R) and (B) to merge the red and blue
patterns with the green.
9.4.3. Adjustment after LCD Panel (G) Replacement
1. Display the white crosshatch pattern according to the chapter 4
"Service Mode" and adjust the lens focus.
2. Adjust the LCD panel (G) to merge the green pattern with the red
and blue ones.
9.4.4. Adjustment after LCD Panel (R) Replacement
1. Display the white crosshatch pattern according to the chapter 4
"Service Mode" and adjust the lens focus.
2. Adjust the LCD panel (R) to merge the green pattern with the green
and blue ones.
9.4.5. Adjustment after LCD Panel (B) Replacement
1. Display the white crosshatch pattern according to the chapter 4
"Service Mode" and adjust the lens focus.
2. Adjust the LCD panel (B) to merge the green pattern with the green
and red ones.
37