Sw: Push Switch Pd: Paddle Switch Dl: Dial; Ssw: Slide Switch; Grip Rubber; Trigger Guard - FUTABA T10PX Full Manual

When replacing the trigger spring
Remove the trigger unit, there is a window at the spring.
First, loosen the trigger spring tension
to the maximum, remove the spring
from the window with tweezers, etc.,
and replace it.
SW: Push switch

SSW: Slide switch

The position of various switches. The assignment of each function can be changed for
T10PX.

Grip Rubber

It is possible to make the narrow
grip by replacing it with the at-
tached grip rubber.
Grip rubber
Loosen the trigger spring
tension to the maximum
PD: Paddle switch
SW3 P PD2
SW2
SSW1
BPS: SW4
Change the grip holding
DL: Dial
PD1 SW5/DL1
SW1
SW6
SW7

Trigger Guard

Change the shape by replacing it
with the attached trigger guard.
Trigger guard
Return to table of contents
17