Auger Assembly - Redback 106487 Operation Manual

Line Trimmer Assembly
TRIMMER
Installing the Trimmer Guard
GUARD
The trimmer guard is an essential part of the line trimmer and must
ALWAYS be used to prevent damage to the trimmer and injury to
the operator. The guard is not attached to the trimmer when it is
delivered to avoid damage in transit. To attach the guard, align the
opening in the guard with the underside of the trimmer head (see
Figure1), and secure with four screws in four places.
Attaching the Plant Guard
Insert the plant guard into the holes of motor housing (see Figure 2).
Inserting/Replacing the Battery
Charge the battery as described in the charger operation manual.
Attach the charged battery into the power tool by positioning,
Figure 1
aligning and then sliding the battery into the power receptacle on
the line trimmer until it clicks into place (see Figure 3).
!
CAUTION
Protect the battery contacts when the battery is not being used.
Metal objects may short-circuit the contacts and pose
both an explosion and fire hazard!
PLANT
GUARD
BATTERY
RELEASE
Figure 2 Figure 3
7