Advertisement
on. A wrench or a key left attached to
a rotating part of the power tool may
increase the risk of injury.
5. Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power
tool in unexpected situations.
6. Dress properly. Do not wear loose
clothing or jewelry. Keep your hair,
clothing and gloves away from
moving parts. Loose clothes, jewelry
or long hair can be caught by moving
parts.
7. If devices are provided for the
connection of dust extraction and
collection facilities, ensure that these
are connected and properly used.
Use of dust collection can reduce
dust-related hazards.
Power Tool Use And Care
1. Do not force the power tool. Use
the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it is designed.
2. Do not use the power tool if it can't
be turned on and off by its switch. Any
power tool that cannot be controlled
with the switch is dangerous and
must be repaired.
3. Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or before storing the power tool. Such
preventive safety measure reduces
the risk of starting the power tool
accidentally.
4. Store idle power tools out of reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate it. Power tools
are dangerous in the hands of
untrained users.
5. Maintain the power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
6. Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
7. Use the power tool, accessories
and tool bits etc. in accordance with
these instructions, taking into account
the working conditions and the work
to be performed. Use of the power
tool for operations different from
5 / 20
Advertisement
