Table of Contents
Advertisement
Fitting the Camera, Equipment and Accessories
2
Attach the supplied V-wedge shoe attachment to
the camera adaptor and secure it with the
hexagonal screws supplied with the viewfinder.
V-wedge shoe
attachment
3
Insert the V-wedge shoe at the base of the
viewfinder into the V-wedge shoe attachment to
attach the viewfinder to the camera.
When you hear a click, the viewfinder is locked.
V-wedge shoe attachment
V-wedge shoe
4
Connect the cable of the viewfinder to the VF
connector on the camera.
18
To remove the viewfinder from the camera
adaptor
Pull the lever and push the button while pulling the
viewfinder toward you, as shown in the figure below.
Attaching a Viewfinder (When the
BKP-9057 Is Installed)
Attaching the viewfinder
For details on attaching a viewfinder, refer to the
instruction manual that came with the viewfinder.
Note
Be sure to turn the VF connector on the viewfinder
mount of the viewfinder saddle fully counterclockwise.
1
Place the viewfinder into the viewfinder mount on
the BKP-9057 so that the mounting wedge on the
bottom of the viewfinder enters the V-shaped
recess on the viewfinder mount. Make sure that
the projections on the bottom of the viewfinder are
positioned as shown in the figure below.
Button
Lever
Advertisement
Table of Contents
