Security Tronix HD-COAXINATOR ST-HD-PTZ-2MP Installation Manual page 7

Setting a Tour
After PRESET locations have been set, enter the OSD MENU, then use
the joystick or up/down arrows to navigate to FUNCTION SETTING and
press OPEN to enter. Next, navigate to TOUR and press OPEN.
Using the controller's joystick or arrow buttons, move left or right at
TOUR NO to select the desired tour to edit, then navigate to SETTING
and press OPEN.
Use the joystick or arrow buttons to navigate tour positions. Up and
down will cycle through the positions currently displayed on screen,
and left and right will cycle through pages of positions.
Once a tour position is selected (indicated by the symbol), press
OPEN to edit the tour position's parameters. Move the joystick left
and right to choose which parameter to edit, or up and down to
change parameter values.
6