Keep Warm Function - CDA HN9850FR Installation, Use And Maintenance Manual

Table of Contents

Advertisement

available for approximately 7 seconds after the hob has been
switched off. Once power has been restored the pause function LED
will flash to indicate that the previous settings can still be restored.

Keep warm function

Each zone is equipped with a keep warm function that is designed to
keep food at a stable temperature. This allows for the serving of food
to be delayed and also for the melting of butter or chocolate.
A flat-bottomed pan must be used so that the temperature can be
accurately measured by the detector within the heating zone.
Due to the potential for the spread of bacteria it is not advisable to
keep food warm for more than two hours.
There are three temperature levels that can be set: 42°C, 70°C and
94°C.
To activate the keep warm function
Touch the desired zone's keep warm function sensor (13) either
once, twice or three times.
Touching the keep warm function sensor (13) once will activate the
42°C heating level.
Touching the keep warm function sensor (13) twice will activate the
70°C heating level.
Touching the keep warm function sensor (13) three times will
activate the 94°C heating level.
17

Advertisement

Table of Contents
loading

Table of Contents