Record Power MAXI-1 Original Instruction Manual page 11

3. Assembly
3.6 Mounting the Switch box to the Stand
1. Place the switch box insertion pegs (Fig.3.6) into the mounting holes on
the main body of the stand (Fig.3.7).
2. Ensuring that the power cable is free to hang down from the switch box,
push the two locking catches down to secure the switch box in
place (Fig.3.8).
3.7 Different Positions of the Switch Box
The Switch box can be attached in two different positions for safety and
ease of use when turning.
Position 1, Fig 3.9
Closest to the headstock is best used when working near the tailstock.
Position 2, Fig 3.10
Closest to the tail stock is best used when working near the headstock.
Fig.3.6
Insertion Pegs
Fig.3.7
Mounting Holes
Fig.3.8
Fig.3.9
Fig.3.10
Locking
Catches
11