Daikin FBQ20EAVAK Installation Manual page 19

01_EN_3PN06583-10W.fm Page 17
(3) Follow the instructions below, and lay the wires in the control box.
Power supply terminals (X1M)
Earth 1 2 3
Power supply
Wiring
wiring
the units
Connection method of
power supply terminals
Outdoor unit
(Terminal block) (Terminal block)
Match both numbers.
Connecting wiring between units
WARNING
Trim and lay the wiring neatly and attach the control box lid securely.
An electric shock or fire may result if the control box lid catches any wiring or the wires push up the lid.
(4) Put the control box lid, and wrap the wire sealing
material (Small) (10) around the wires so as to
block the wire through holes.
English
Thursday, March 24, 2011 9:03 AM
Fix the wires with clamp (8)
to the wire fixing bracket
provided to the control box.
Remote controller
wiring (Low voltage)
Twist and fix the upper part so
that the wires will not drop out.
Fix the cord with the
L N clamp (8) to the wire
fixing bracket provided
to the control box.
Indoor unit
Insert the cord into the wire clips
provided with the control box.
PROHIBITED
Never connect wiring the units
and the power supply wiring.
P1 P2 F1 F2
Remote controller
wiring (No polarity)
Connection method of remote
controller terminals (X2M)
• If stranded wires are used,
do not solder the front end
of the wires.
Wire through holes
18