Messages, warnings and failure codes
2
2
9-2
All manuals and user guides at all-guides.com
Projector will switch to 'Standby'
when the RCVDS is no longer
available.
The entered frequency or
applied frequency of the source
is out of the projector's range.
Adjustment settings are lost.
Reload using Projector Control
Software via PC or MAC (if this
option is available), or readjust
image.
Message to inform that selected
table is deleted. This message
will be followed by 'confirm
message', on which the user has
to answer.
Wrong software version in your
projector.
Call for technical support.
Hardware failure.
Call a
qualified service technician for
repair.
Hardware failure.
Call a
qualified service technician for
repair.
Serial communication error
between RCVDS and projector.
Hardware failure.
qualified service technician.
Communication error between
IRIS and the projector. Call a
qualified service technician.
Message during the start up of
the IRIS.
Message will disappear when the
IRIS is ready to accept com-
mands.
5975996 BARCOGRAPHICS 808s 241197
Call a