Barco GRAPHICS 808S Isntallation Manual page 31

Loosen bolts E, F, G and H to pivot the blue CRT until the center of
the Blue image and the center of the Green image coincide. When
the angle of the blue CRT is corrected, tighten the four bolts.
Press the <ENTER> key to continue with the diagonal focusing menu.
Press the <EXIT> key to return to the CRT projection angle adjust-
ment.
Projection angle correctly aligned for screen width SW1.
5975996 BARCOGRAPHICS 808s 241197
All manuals and user guides at all-guides.com
Blue crosshair
Green crosshair
Move the blue CRT to the
outside, away from the green
CRT
Blue crosshair
Green crosshair
Move the blue CRT towards
the green CRT
Installation adjustment mode
CRT
PROJECTION ANGLE
ADJUSTMENT
Align crosshairs
<ENTER> continue
<EXIT> to return
The same projection angle is misaligned for new screen width SW2.
Realignment is necessary. Each screen width change requires
readjustment of the projection angle.
SW2
(SW1 > SW2)
370b
8-5