Table of Contents
Advertisement
5.13 Adjust Channel Amplitude:
Turn Channel 1 or 2 clockwise. The output indication will be showed on the left side (Channel 1) and right side
(Channel 2) of the LCD screen as long as the unit is in operation. Slowly turn the Channel Amplitude control until
you reach the setting recommended by your medical professional. Repeat for the other channel, if both channels are
to be used.
Caution: If the stimulation levels are uncomfortable or become uncomfortable, reduce the stimulation intensity to a
comfortable level and contact your physician if problems persist.
5.14 Turn Unit Off:
Turn both Channel Amplitude controls to "OFF". Then unplug the electrode lead wires, grasping them by the plug,
not the cord. If treatment will be resumed shortly, the electrodes may be left on the skin. When the electrodes are
removed, clean the skin thoroughly with mild soap and water. If there is skin irritation, consult your medical
professional.
Caution: When therapy time is completed, and if the user doesn't turn off the amplitude knob, the unit will continue the
"beeping" sound every 10 seconds until the amplitude knob is turned off completely.
15
Advertisement
Table of Contents
Need help?
Do you have a question about the NMES and is the answer not in the manual?
Questions and answers
I purchased your device and have a question regarding the dials at the top of the unit which have numbers 1-8. Other than turning the unit on, what are they used for and what is the significance of the numbers? Thanks Doug