Icom IC-M87 Service Manual page 28

CONTACT SPRING ASSEMBLY INSTRUCTION
[1] PREPARING TWO SHORT LEADS
q Cut the W1 (CHASSIS).
W1(CHASSIS)
[2] SOLDERING SHORT LEADS
q Cut off the area as below.
Cut off
MP2(CHASSIS)
1 mm (aprrox.)
2 mm (aprrox.)
Cut off
(Side view)
[3] ADDING THE GLUE AND CUTTING OFF EXTRA LEADS
q Fill up the MP2 with glue completely.
DO NOT apply the glue to the area except
DO NOT overflow the glue.
CAUTION
Glue
- Glue Type-
Manufacture: Cemedine Co.
Type: Super-X
w Bend the leads according to the dimensions below.
4.0–4.5 mm
3.5–4.0 mm
w Solder the short leads.
short leads
short lead
: solder point
(Top view)
w Cut off two inner leads from the bottom.
.
Cut off
7 - 3
NG OK