Operator Manual
8.
INSTRUCTIONS FOR TABLE OPERATION
8.1.
CASTER MOTION AND STEERING SETTINGS
The motion of the table can be configured two ways:
1. "STEER" where the rear casters are free rolling in all directions.
2. "LOCK" where the rear casters will not be able to roll at all.
Before loading a patient onto the table, always set the
caster motion pedals in the "LOCK" position. Failure to
Note: The front wheels only roll forwards and backwards.
L100-3265 Rev. A
Aspect ISO-Drive
do so could result in death or serious injury.
The Table is in "STEER" mode with the Caster Lock Pedal as
shown in this picture. The Rear Casters can swivel freely and roll
in any direction while the front wheels remain in line with the
table.
The Table is in "LOCK" mode with the Caster Lock Pedal as
shown in this picture. The Rear Casters will be locked and will
not roll or swivel.
Always lock casters in this way before loading the patient.
www.imagediagnostics.com
WARNING!
14