Table of Contents
Advertisement
Quick Links
Description:
Expert Line L2 Managed 24-port 10/100/1000Base-TX (PoE+) + 4-port
10/100/1000Base-TX or 100/1000Base-FX SFP Combo Ethernet Switch
Overview:
IES24242MPp-S is a new generation, managed, industrial grade, L2 Gigabit PoE (Power
over Ethernet) switch that provides 24x10/100/1000Base-TX RJ45 ports plus
4x100/1000Base-FX SFP ports with 8xPoE ports (optional). It provides stable and
reliable Ethernet transmission with high quality design and reliability.
Package Content
⚫
Managed PoE Switch x 1
⚫
Adhesive Rubber Feet x 4
⚫
Mounting Accessory x 1
⚫
AC Power Cord x 1
⚫
RJ-45 Console Cable x 1
◎
Keep power off during installation
◎
use Antistatic Wrist Strap correctly
◎
Make sure using correct power supply, voltage must match
◎
Make sure enough power supply from PSU that will not overload
◎
Double check the wiring ( +/- ) is correct.
Quick Installation Guide
IES24242MPp-S
Read Before Install
Quick Installation Guide
IES24242MPp-S / version 1.1
OT Systems Ltd. | www.ot-systems.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for OTS IES24242MPp-S
Summary of Contents for OTS IES24242MPp-S
- Page 1 10/100/1000Base-TX or 100/1000Base-FX SFP Combo Ethernet Switch Overview: IES24242MPp-S is a new generation, managed, industrial grade, L2 Gigabit PoE (Power over Ethernet) switch that provides 24x10/100/1000Base-TX RJ45 ports plus 4x100/1000Base-FX SFP ports with 8xPoE ports (optional). It provides stable and reliable Ethernet transmission with high quality design and reliability.
- Page 2 Quick Installation Guide IES24242MPp-S / version 1.1 ◎ Keep installation dry and clean. ◎ Do not open the chassis Physical Description 1. Power LED 2. System LED 3. Alarm LED 4. Port LINK LED 5. Speed LED 6. DC Power Input 7.
- Page 3 Quick Installation Guide IES24242MPp-S / version 1.1 Step 5: place the switch in a proper position in the rack, supported by the bracket; fix the L-shaped bracket on the fixed guide slots at both ends of the rack with screws, so as to ensure that the switch is stably and horizontally installed on the rack.
- Page 4 Quick Installation Guide IES24242MPp-S / version 1.1 Power Input The Industrial Switch has two redundant power inputs, PRW1 and PWR2. The Phoenix terminal patch panel connector is located on the top panel of the switch. The front view of the patch panel is shown below.
- Page 5 Quick Installation Guide IES24242MPp-S / version 1.1 Data transmission enabled Blink SFP port disconnected Ethernet port connected Ethernet Port (Yellow LED) Data transmission enabled Blink Ethernet port disconnected 1000M Ethernet Port (Yellow LED) 10/100M System Alarm normal General To ensure trouble free transportation and storage, all OT Systems products must be thoroughly inspected, tested and properly packed before delivery.
Need help?
Do you have a question about the IES24242MPp-S and is the answer not in the manual?
Questions and answers