Operating Board; Air Breather Assembly - Midea WQP6-3207A Technical Service Manual

Part Name: 1 – corner board 2 – absorber 3 – backboard 4 – hollow plate

Operating board

Removal and Replacement
1. Disconnect power supply.
2. Remove shell. (see shell removal and installation)
3. Take out two corner boards, absorber sound, backboard, hollow plate.
4. Remove all screws for fixing cover of protecting box. (see main control board removal and
replacement)
5. Put out all housings for connecting operating board.
6. Then take out connecting lines of operating board from protecting box.
Housings
7. Remove outer door assembly. (See outer door removal and installation).
8. Remove all screws for fixing operating board.
9. Reverse the above procedure to install. And check out all connectors connects well.

Air Breather Assembly

Removal and Replacement
1. Remove shell. (see shell removal and installation)
2. Take out two corner boards, absorber sound, backboard, hollow plate.
3. Contrarotate nut of air breather. Take out air breather gasket.
4. Take out gasket of air breather, and remove clamp for fixing connecting hose to air breather.
5. Reverse the above procedure to install.
Connecting lines of
operating board
1
2
3
4