Replacement Procedure, Wiring & Testing Of Parts - Equator EZ3720CEE Service Manual

Replacement Procedure, Wiring & Testing of Parts
1) Power Switch (52799)
Replacement Procedure:
▪
Unplug the unit.
▪
Remove the top panel (Two screws behind and slide back)
▪
Pull out the soap dispenser, plastic washer knob and dryer knob.
▪
Remove the control panel. (3 Screws)
▪
Pull out the plastic switch cover for the power switch.
▪
Pull out the power switch by matching the grooves in the panel pushing the switch
towards the back.
▪
Replace with the new switch and do the wiring as before / below.
▪
Fix all the parts back by following the reverse procedure.
Wiring: Power switch - bottom view
111
113
Testing Procedure:
▪
Cold Test:
1) When the Power button is pushed in – There will be continuity between the connectors
1 & 3, 2 & 4.
1 2 112
3 4 114
12