E2S D105 AlertAlarm Instructions/Service Manual page 4

• All models are approved for use as Audible Signal Appliance
for use as General Signaling: UL464A & CSA C22.2 No 205-17
• Type 4 / 4X / 3R / 13, IP66
• -40°C to +66°C / -40°C to +151°F
General Signaling Canada:
D105DC024: -40°C to +55°C / -40°F to +131°F
D105AC230: -40°C to +40°C / -40°F to +104°F
• To maintain Ingress Protection, cable entries must be fitted with suitably rated cable glands or stopping plugs
• EOL Monitoring (DC Only): End of Line Devices may be fitted between the +ve & -ve terminals of the PCBA. Please ensure that the device
legs meet the wire size range stated for the connection terminals and are fitted correctly in order to avoid a short. Refer to the compatible
control panel specification for EOL device values and ratings.
Model
D105DC024
D105DAC230
*Max Operating current for worst-case input voltage;
E2S Warning Signals Impress House, Mansell Road, Acton, London W3 7QH
Nominal Voltage
12V dc
24V dc
48V dc
48V ac
24 - 260V ac 50/60Hz /
115V ac
230V ac
#
Nominal current at nominal voltage and Tone 12
Voltage Range Nominal Operating Current
10 - 60V ac
60-260V dc
sales@e2s.com e2s.com
#
Max Operating RMS*
17mA
33.5mA
113mA
42mA
25mA
17mA
D172-00-001-IS Issue 1 14/05/2021
125mA
42.5mA