Getting Ready To Take Pictures; Turning The Camera On And Off; Saving Power With Auto Shut-Off - Epson PhotoPC 600 User Manual

Getting Ready to Take Pictures

Before you can take pictures with PhotoPC 600, you need to
turn on the camera and check the display panel. It's
important to be aware of the camera's power-saving features
and the status of your batteries.

Turning the Camera On and Off

To turn the camera on, rotate the lens cover
counterclockwise. The lens cover opens and the display panel
on the top of the camera lights up, as shown in the
illustration on the right. The status light on the back of the
camera flashes for a few seconds. When it turns green, the
camera is ready to take pictures.
To turn off the camera, rotate the lens cover clockwise. The
lens cover closes and the display panel turns off.
2-2 Taking Pictures
.

Saving Power With Auto Shut-off

If you wait more than 60 seconds before taking a picture, the
camera turns off automatically to save battery power. To
turn the camera back on, close the lens cover and then open
it again.
If you want, you can change the 60-second time period for
auto shut-off. For more information, see pages 8-6 and 8-8.
display panel
On
Off