Table of Contents
Advertisement
2
Turn the camera on and wait until the status light turns
green.
viewfinder
3
Look straight through the viewfinder and center your
subject within the cross-hairs.
4
Hold the shutter button halfway down to lock the auto
focus. The status light changes from green to orange. At
this point, you can move your subject off-center if you
want.
2-4 Taking Pictures
status light
shutter
button
5
Press the shutter button the rest of the way down to take
the picture.
6
Hold the camera still until it beeps and the status light
starts flashing red.
The flashing red light indicates that the camera has captured
the image and is processing it.
CAUTION
If you set the camera down while it is processing a picture, make
sure you handle it carefully. The camera may lose your image if
you set it down too hard.
When the light stops flashing and turns green, the image is
saved and you can take another picture. Saved images remain
in memory for at least a year, even when the camera is turned
off and the batteries are removed.
NOTE
Remember that the camera shuts off automatically after
60 seconds. To turn the camera back on, close the lens cover
and then open it.
Advertisement
Table of Contents
