Table of Contents
Advertisement
With the memory card installed in the camera, follow these
steps:
1
Set the screen switch to Playback. If you haven't used
the memory card, you may see the following message:
This applies to the memory card only, and does not
indicate whether you have photos in the camera's
internal memory.
2
Press the SELECT button to display the LCD screen
menus.
3
Press the
or
button until you see the Photo
Control menu
. Then press the SELECT button to
display the menu options, as shown on the right.
4
Press the
or
button until Format Card is
highlighted.
5
Press the SELECT button. A message appears stating
that all data on the card will be erased and asking you to
confirm the procedure.
6
Press the SELECT button again to format the card and
return to the Photo Control menu.
7
Press BACK until you return to normal playback mode.
NOTE
If you are unable to format a Simple Technology card, contact the
Technical Support Department at (800) 4-SIMPLE.
Using CompactFlash Memory Cards 10-5
10
A
B
Advertisement
Table of Contents
