Table of Contents
Advertisement
OPERATING INSTRUCTIONS
USING THE ALLEVARED LIGHT THERAPY BELT
1. Place the AllevaRed therapy belt in position around your waist with the
adjustment strap in the front, ensuring that the LED side of the belt is
touching your body or clothing.
2. Use the Velcro
adjustment strap to secure the belt. It should be snug,
®
but not too tight.
3. Connect the AllevaRed to a power source (see page 10).
4. Press the On/Off button on the control panel to turn on the device. The
display screen will light up and the display will show "OFF".
5. Press the Intensity button to choose from the 5 light intensity levels
L0–L4. Your selection appears in the display window. L0, the lowest
setting, is the default. You can adjust intensity at any time.
6. Press the Time button to adjust the therapy session duration from
5–30 minutes, in five-minute increments. The default duration is 5
minutes. Each time you press the Time button, the duration increases
by five minutes. To decrease the duration, press the Time button until
the number is 30. Continue to press the Time button, and the timer
will start over again at 5 minutes. Keep pressing to reach your desired
session duration. Your selection appears in the display window and can
be adjusted at any time.
7. Press the Mode button to select your desired mode, either red or
infrared. You can change the mode at any time.
8. Press the On/Off button to stop the therapy session at any time. The
AllevaRed will automatically shut down when the set time duration is
complete. Press the On/Off button again if you wish to continue using
the device.
9. Always power off and unplug the unit after each use.
12 AllevaRed User Manual Lifepro
CHOOSING A LIGHT THERAPY
TREATMENT OPTION
TREAT YOUR UPPER BACK - WHILE SITTING IN A CHAIR
1. Sit down on a sofa or chair.
2. Place the AllevaRed behind your upper back with the LEDs toward you.
3. Turn on the AllevaRed and treat while seated.
TREAT YOUR UPPER BACK - WHILE LYING DOWN
1. Place the AllevaRed on the floor with the LEDs facing up.
2. Lie on the floor with your upper back positioned over the belt.
Turn on the AllevaRed and begin your treatment.
TREAT YOUR QUADS (FRONT OF THIGHS)
1. Sit down on a sofa or chair.
2. Wrap the belt around your thigh. Adjust the Velcro
is snug.
3. Turn on the AllevaRed and treat one thigh at a time.
TREAT YOUR HAMSTRINGS (BACK OF THIGHS)
1. Sit down on a sofa or chair.
2. Wrap the belt around your thigh. Adjust the Velcro
is snug.
3. Turn on the AllevaRed and treat one thigh at a time.
TREAT YOUR IT BANDS (OUTER THIGHS)
1. Sit down on a sofa or chair next to the padded arm.
2. Wrap the belt around your thigh OR place the AllevaRed between the
sofa arm and your outer thigh with the LEDs facing toward you.
3. Turn on the AllevaRed and treat one thigh at a time.
strap until the belt
®
®
strap until the belt
Wellness Recovery Collection 13
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ALLEVARED and is the answer not in the manual?
Questions and answers
what are the settings for specific issues? IE, circulation, neuropothy, E D, weight loss, and many other issues, please let me know, thanks
How do you use the belt for the shoulder
To use the Lifepro ALLEVARED belt on the shoulder:
1. Attach the Velcro® extension belt to add length for shoulder use.
2. Place the belt over the shoulder and across the chest.
3. Bring the belt under the opposite arm and around the back.
4. Secure the belt in the front using the Velcro® strap to keep it snug but not too tight.
5. Ensure the belt stays close to the body and does not shift during movement.
6. Connect the remote control cable to the DC power port near the pocket.
7. Power on the device to begin light therapy.
This answer is automatically generated