Safety Warning Information - Youkey Q7 Instructions For Use Manual

Security
symbol
Nonionizing radiation

1.4 Safety warning information

In order to ensure the safety of the patient and the operator, the following safety rules should be
strictly observed in the use of the wireless ultrasonic probe.
Do not use the scanner in an environment containing combustible
gas, such as an anesthetic gas, hydrogen, or flammable liquid,
：
DANGER
such as ethanol. It may cause an explosion.
1
Do not disassemble the ultrasonic probe, which may cause electric shock.
.
2
Use the original power cable, or charging the scanner may cause electric shock.
.
3
Use the probe carefully, if the probe is scratched with the contact surface of the
.
human body, immediately stop using the probe and contact the service
representative. If you use a scratched probe, there is a risk of electric shock
4
Every time you use the instrument must be checked for safety, do not let the
.
probe by the impact of damaged ultrasound probe may cause the patient to be
shocked.
WARNING:
5
Before performing an ultrasound check, check the surroundings to ensure safe
.
use within the environment. Do not operate the unit in an environment with
flammable or explosive liquids, vapors or gases such as oxygen or hydrogen.
6
Use sterilized ultrasound cover when doing gynecology exam.
.
7
Do not immerse the ultrasonic probe Type-C interface or above in water or
.
disinfectant. Because the Type-C interface of the ultrasonic probe does not have
a waterproof function, this may cause an electric shock or a probe malfunction.
8 Make sure the transducer is in good status before and after each exam. The
defective transducer may cause electric shock.
9 Choose different transducer based on the exams. You can only use the
transducer provided by the manufacturer.
1
In order to ensure safety, the charging of the system can only be carried out in
0
the state of shutdown, and the charging is not allowed under the power-on state.
Detailed description
9