Youkey Q7 Instructions For Use Manual page 20

System time
➢
Displays the current system time. Check time as the image freezes when the system
freezes.
Menu and Image Parameter display area
The areas can be divided into two parts : image mode switching area and image
parameter adjustment area.
B mode,click to switch to M mode, click back to B mode;
➢
Color mode，Click to enter Color mode, click again to enter Power mode;
➢
PW mode，Click to enter the pre-startup status of PW mode and click again to
➢
start / pause to get the spectrum.. It's the same function as update.
➢ Drop-down menu flag, click to enter the corresponding image mode of all
parameters adjustment.
Depth
Gain
➢
Image parameter adjusting pulley：Slide up and down or click on the pulley to adjust the
corresponding parameters.
Function shortcut key area
Contains freeze/unfreeze /saves image buttons
Freeze and unfreeze the clinical images
Save image button.
Image area
The image area displays images of each mode and probe direction markers, time lines (in
M mode), PW sampling lines (PW mode), axes (including depth axes, time axes), etc.,
while annotating information and measuring, The gray bar also appears here
20