Selecting Settings - Epson Perfection 1640SU Office Scanner Basics

2. Load the slide or film with the base side down on the scanner's document table in
the transparency unit window, as shown below.
3. Close the transparency unit.
Leave the narrow calibration window
uncovered, otherwise the colors in your
scans will be affected.
Make sure the unit is completely closed,
otherwise an option error results and you
will not be able to scan the document or
get correctly colored images.

Selecting Settings

In EPSON TWAIN, select
Source setting, depending on the type of film (35 mm film strips or slides) you are
scanning. When previewing images of negatives scanned using a film holder, the color
may appear odd as the frame of the film holder is perceived as white, causing your
scans to appear darker. To see the correct color, click and drag the mouse over the
image area, then click the
settings, see your electronic Reference Guide, as described on page 22.
or
TPU - Neg. Film
button. For details on scanner software
Zoom Preview
calibration
window
as the Document
TPU - Pos. Film
Transparency Unit
51