Selecting Settings - Epson Perfection 1640SU Office Scanner Basics

Make sure no documents or dust are on the document table glass when
using the auto document feeder. Dust on the document table glass near
the carriage home position may result in vertical lines on the scanned
images.
Follow the steps below to load paper into the auto document feeder:
1. Pull out the lower paper support.
2. Slide the right edge guide all the way to the
right.
3. Insert the paper stack into the ADF until it
meets resistance. Make sure that the side you
want to scan is facing up, with the top edge
facing into the feeder; the first page you want
to scan should be on top.
4. Move the right edge guide so it is flush with
the right edge of your paper.
Documents are output into the lower tray after
scanning is finished.

Selecting Settings

Be sure to select
EPSON TWAIN. For more information on selecting driver settings, see your
electronic Reference Guide, as described on page 22.
56
Auto Document Feeder
Auto Document Feeder
(ADF) in the Document Source setting in