Automatic Document Feeder; Lights And Buttons; Option Interface Connector - Epson GT-30000 Product Information

EPSON GT-30000

Option Interface Connector

Interface type For use with the automatic
document feeder (B813212)
Output voltage 21.6 to 26.4 VDC
4.75 to 5.25 VDC
Output current 0.6 A (24 V)
0.3 A (5 V)

Automatic Document Feeder

General
Paper
input/output Load face up; eject face down
Paper quantity 100 pages (80 g/m
total
thickness under 0.48 inches [12 mm])
Reliability 100,000 sheets (load/eject MTBF)
Dimensions Width: 23.8 inches (606 mm)
Depth: 19.2 inches (488 mm)
Height: 5.3 inches (134 mm)
Weight Approximately 28.6 lb (13 kg)
Electrical
Input voltage 22.8 to 25.2 VDC
4.75 to 5.25 VDC
Input current 24 V: 1.5 A
5 V: 0.4 A
Environmental
Temperature Operating: 41 to 95 °F (5 to 35 °C)
Standby:
Humidity (without
condensation) Operating: 10 to 80%
Standby:
4 - EPSON GT-30000
2
paper, maximum
13 to 140 °F ( 25 to 60 °C)
10 to 85% or less

Lights and Buttons

The scanner has two indicator lights and two buttons on its
control panel. Light status and button functions are
described in the tables that follow.
Scanner indicator lights
Light Light status
N
READY
F (flashing)
ERROR N
F (rapidly flashing)
N = on, F = flashing
Error conditions
ERRO READ
R light Y light Error type
N N
Command error: The scanner has received incorrect
commands from your scanning software. Try
rescanning the document.
F O
Interface error: Check that your scanner is securely
connected to your computer, and then turn the
scanner off and back on again.
F F
Fatal error: Check that the transportation lock is
released, and then turn the scanner off and on again.
If this doesn't solve the problem, call your EPSON
dealer.
O
N
Option error: There's a problem with an installed
option (EPSON TWAIN will report the error
condition). Check to make sure the automatic
document feeder is flat against the document table.
Check that your option is securely connected to the
option connector at the back of the scanner. Finally,
check that the automatic document feeder isn't out
of paper and doesn't have a paper jam. If these
suggestions don't solve the problem, call your
EPSON dealer.
N = on, O = off, F = flashing
Scanner buttons
Button
P Operate
Start
3/01
Scanner status
Ready to scan images
Scanning is in progress or the scanner is
being initialized
An error occurred; see the following
table for more information
Function
Turns the scanner on and off.
Automatically launches a Start button-
compatible application. You must set up your
scanner software and a compatible application to
use this button.
If you installed NewSoft™ Presto!™
PageManager, it's automatically assigned to the
Start button. You can set up Presto! PageManager
to scan your image automatically and send it
directly to another application or a peripheral
device, such as a printer.