Optional Automatic Document Feeder - Epson B107011F - GT 10000 Product Information Manual

Connector type: Two Micro DB-50 high-density
connectors
Connector pin arrangement:
25
50
Initialization methods
Scanner is turned on or receives a SCSI Reset signal from the
SCSI interface (hardware initialization).
Scanner receives a SCSI Bus Device message or an Esc @
command from the software (software initialization)

Optional Automatic Document Feeder

(GT10000ADF)
The ADF allows you to automatically load multi-page
documents into your scanner.
General
Type: Page feeding and duplex scanning with
automatic reverse
Document
feeding: Pages are center aligned, fed face up from
bottom of stack, and ejected face up
Document
replacement time: 1.2 seconds (Letter/A4 landscape)
Multiple sizes: Unavailable; all documents in a stack must
be the same size
Noise: 50 dB or less
Reliability: 100,000 sheet paper feeding life
100,000 sheet paper ejecting life
100,000 hinge closings
Dimensions: Width: 23.6 inches (601 mm)
Depth: 20.8 inches (528 mm)
Height: 4.8 inches (122 mm)
Weight: 35.2 lb (16 kg)
Documents Supported
Document size:
1
Feeding capacity: 50 sheets of 21 lb (80 g/m
26
Ejecting capacity: 100 sheets
Paper quality:
Compatible
paper types:
Paper thickness:
Electrical
Power supply:
Consumption
current:
Insulation
resistance:
Dielectric
strength:
Resistance to
static electric noise: Case: Operated properly at 10 kV or less
1/00
EPSON GT-10000
Portrait: A3, Ledger, B4, Legal, A4,
Letter, B5,
A5, 5.5 5.8 inch (140
Landscape: A4, Letter, B5, A5
Letter
or smaller
30 sheets of 21 lb (80 g/m
Legal
or larger
High-quality bond paper
High-quality paper, ink jet paper,
bond paper
13 to 33 lb (50 to 127 g/m
Don't use the following paper types:
transparencies, tracing paper, coated paper
(such as photo quality and glossy paper), labels,
multipart forms, carbon paper, or paper with
staples, holes, rips, curls, or folds.
Supplied through the scanner
24 ± 10% VDC
5 ± 10% VDC
24 VDC: 2.0 A
5 VDC: 0.3 A
10 m or more at 500 VDC
(between AC line and chassis)
1000 VAC per minute
(between AC line and chassis)
Metal: Operated properly at 7 kV or less
EPSON GT-10000
148 mm)
2
) paper: A4,
2
) paper: B4,
2
)
- 4