Replacing The Battery - Midtronics MDX-650P SOH Instruction Manual

Battery conductance and electrical system analyzer
Table of Contents

Advertisement

MDX-650P SOH

Replacing the Battery

The MDX-650P can test down to 5.5 volts when the unit's internal batteries are
not functioning. The tester displays LOW INTERNAL AA BATTERIES, REPLACE AA
BATTERIES SOON! when the internal AA batteries need to be replaced.
NOTE: Setup information will be retained while you change the
internal batteries.
Use the following procedure to remove and replace the internal AA batteries.
1.
Turn the tester face down.
2.
Remove the screw securing the battery compartment cover using a small
Phillips screwdriver.
3.
Lift the door off and remove the discharged battery.
4.
Insert fresh AA batteries making sure the positive and negative terminals
are positioned correctly.
5.
Reposition the cover and tighten the screw.
18
www.midtronics.com

Advertisement

Table of Contents
loading

Table of Contents