Changing The Printer Paper - Midtronics MDX-650P SOH Instruction Manual

Battery conductance and electrical system analyzer
Table of Contents

Advertisement

MDX-650P SOH

Changing The Printer Paper

The IR printer only uses thermal paper in a roll with the dimensions 2.25 in x 85
ft (57 mm x 25.9 m). You can purchase replacement rolls at most office supply
stores.
If you have difficulty obtaining paper please contact Midtronics customer
service at 1-800-776-1995.
Store
Office Depot
Quill
Staples
To replace the paper roll:
1.
Unlock the printer door by gently pressing on the red lever. Remove the
spent roll.
2.
Place a new roll of paper in the compartment, and pull the paper forward
so that it extends past the serrated edge of the paper slot.
3.
Close the door and make sure the lever locks securely.
Part Number
209-653-271
856607
531236
release lever: press in this direction
paper feeds from
underneath the roll
16
Phone
800-463-3768
800-789-1331
800-378-2753
paper
compartment
paper
sensor
www.midtronics.com

Advertisement

Table of Contents
loading

Table of Contents