Atos Medical CareTips Provox LaryButton How To Use

Provox® LaryButton™
When and How to Use
The Provox LaryButton sits inside the stoma by itself and prevents
the tracheostoma from shrinking. It is used to hold the Provox
HME's, Provox ShowerAid and the Provox FreeHands HME®.

1. Sizing of the Provox LaryButton:

• Your ability to use the LaryButton depends on the size and shape of your
stoma. It should fi t well into your stoma without causing irritation.
Your clinician needs to size you using a Provox LaryButton Sizing Kit.

2. Inserting the Provox LaryButton:

• Lightly lubricate the small end of the LaryButton that fi ts into your
stoma. Use only a water soluble lubricant.
• Fold the narrow end of the LaryButton in half with your fi ngers or
hemostat and hold it fi rmly folded.
• Insert the narrow end into your tracheostoma and release your fi ngers.
• Gently tug on the LaryButton tabs to insure the LaryButton is seated in
the correct position.
• Confi rm that the LaryButton is in the correct position and is not
pushing on the voice prosthesis.
• Th e LaryButton can be secured with the Provox LaryClip™ or
a Provox TubeHolder.
• Insert a Provox Heat and Moisture Exchanger (HME) or Provox
FreeHands HME into the opening of the LaryButton.
• Determine the wear schedule with your clinician.
TIP: A wear schedule will gradually build up tolerance to the
Provox LaryButton preventing stomal irritation.
This text does not replace nor does it set forth the complete contents of the User Manual and/or Prescriber Information for the products in this
text, and is not a substitute for reviewing and understanding that important information. Therefore, before prescribing and/or using any of the
products included in this text, please review the entire contents of the respective User Manual and/or Prescriber Information.
For more information contact us at: info.us@atosmedical.com • www.atosmedical.us • 1.800.217.0025
Hospital
Department
Clinician
Contact information