Troubleshooting - Epson PowerLite S1 Product Information Manual

Power
3. Press the P button again. The lamp is turned off and
Power
the P light flashes orange as the projector cools
down. When the projector has cooled, the P
stays orange and the exhaust fan shuts off.
Note: If you want to turn the projector on again, wait until
the orange light stops flashing. Then press the P
button.
4. Unplug the power cord from the electrical outlet.
Caution: Do not disconnect the power cord while the power
light is flashing orange because it may cause problems with the
projector.
5. Replace the lens cover.

Troubleshooting

If you see a blank screen
If you see a blank screen or the
following:
❏ Make sure the P power light on the projector is green and
not flashing and the lens cover is off.
❏ Try turning off the notebook and restarting it.
❏ If you've connected more than one computer and/or video
source, you may need to press the
the projector to select your video source. (Allow a few
seconds for the projector to sync up after pressing it.)
❏ If you're using Windows
the function key that lets you display on an external
monitor. It may have an icon such as
labelled CRT/LCD. (Allow a few seconds for the projector
to sync up after pressing it.)
If the projector and notebook don't
display the same image
If you're using a Windows notebook:
❏ On most systems, the
toggle between the LCD screen and the projector, or display
on both at the same time.
❏ You might need to use the Display utility in the Control
Panel to enable both the LCD screen and external monitor
port. Check your notebook's manual or online help for
details.
❏ If you have dual monitor support, you may need to uncheck
the option to extend your Windows desktop in the Display
Properties.
Power
Power
No Signal
message, check the
Source
button on top of
®
, hold down the Fn key and press
, or it may be
CRT/LCD
or key lets you
If you're using a Macintosh
®
Mac OS X:
light
System Preferences
1. Select
Displays
.
Detect Displays
2. Click
3. To display the entire desktop on both your projector screen
and LCD screen, click the
you don't see this tab, make sure it is not hidden by another
window on your screen.)
Mirror Displays
4. Click
of the monitor icons automatically moves on top of the
other.
Click here
If you're using a Macintosh PowerBook with
Mac OS 9.x or earlier:
1. From the Apple menu, select
Monitors and Sound
5/03
EPSON PowerLite S1 Projector
®
PowerBook
®
from the Apple
.
Arrangement
or
in the lower corner of the screen. One
Control Panels
.
EPSON PowerLite S1 Projector - 5
®
with
menu and click
Click here
Arrange
tab. (If
, then click