Selecting The Color Mode; Using The Automatic Setup; Selecting The Aspect Ratio; Turning Off The Picture And Sound - Epson PowerLite S1 Product Information Manual

EPSON PowerLite S1 Projector

Selecting the Color Mode

There are five color modes available. Make a selection
appropriate for the conditions in which you are projecting.
❏ Dynamic
Images are modulated and made crisper to emphasize
brightness.
❏ Presentation
Brightness is emphasized. For presentations in bright rooms.
❏ Theatre
Best for watching movies in their natural tones.
❏ Living Room
Brightness is emphasized. Ideal for playing video games in
bright rooms.
❏ sRGB
Conforms to the sRGB color standard. If the connected
source has an sRGB mode, set both the projector and the
connected source to sRGB.
The color mode changes each
Color Mode
time you press the
button on the remote control.
Dynamic → Presentation →
Theatre → Living Room →
sRGB
Default Value
❏ Computer input: Presentation
❏ Other input: Dynamic
Note: You can also change the color mode through the Image menu.

Using the Automatic Setup

If you are projecting from a computer, the projector
automatically adjusts the input signals to produce the best
image quality. Automatic setup adjusts the Tracking, Sync, and
other image settings.
Auto Setup
However, if in the Image menu is set to
Auto
need to press the button on the remote control while
projecting from a computer to have the projector make the
adjustments.
Sometimes the signals may not be adjusted correctly, depending
on the type of signals being output by the computer. In such
cases, use the Image menu to adjust the tracking and sync
settings manually.
8 - EPSON PowerLite S1 Projector

Selecting the Aspect Ratio

The aspect ratio is the ratio between an image's width and its
height. Standard images have an aspect ratio of 4:3 and HDTV
and DVD images have an aspect ratio of 16:9. If your video
source is 16:9, you can change the aspect ratio to view the video
in 16:9 wide-screen format.
Press the
remote control to change the aspect
ratio.

Turning Off the Picture and Sound

Press the
your screen and turn off the sound. When you're ready to
resume, press
If you press the button while projecting from a video source,
and you don't pause the video, it continues to play even though
you can't see or hear it. When you press the
again to resume, the playback does not resume at the exact
point you paused it.
Note: You can make the blank screen blue, instead of black,
whenever you press the
background color in the Setting menu.

Freezing the Action

Press the
OFF
, you
freeze the action on the screen. This freezes any moving images
on the screen until you press the
Like the A/V Mute feature, if you are projecting a video, the
video and audio continue while the projected image is paused,
so when you press the
playback does not resume where you stopped it.
5/03
Aspect
button on the
A/V Mute
button on the remote control to darken
A/V Mute
again.
A/V Mute
button by selecting it as the
Freeze
button on the remote control to temporarily
Freeze
Freeze
button again to resume, the
A/V Mute
button
button again.