Hibernate Suspend - Prestigio Nobile 1522E User Manual

Hibernate Suspend

In this mode, all system data are saved in the hard disk before powering down. When this mode is activated, all
system state and contents are saved to the hard disk drive after a period of inactivity defined by the user. No power
or very little power is drawn from the battery module under this mode.
However, depending on how much RAM that have been installed on your computer, the amount of time the system
requires to restore all its previous contents can range from 5 to 20 seconds.
For Windows XP users, hibernation is handled by the operating system; therefore, no special disk partition or disk file
is necessary.
If you wish to activate Hibernate mode, you need enable Hibernate Support in the Hibernate tab of the Power
Options menu.
Note: Do not install or remove the memory module when the system is in the suspend mode.
Note: Actual dialogue box shown above may appear slightly different.
Prestigio Nobile 1522E 25