Connecting To The Network - Prestigio Nobile 1522E User Manual

Ethernet
Your computer is equipped with a 10/100Base-TX Fast Ethernet network adapter. Connect the active LAN cable to
the RJ-45 LAN port located on the right side of the computer. This allows you to access and transmit data in the local
area network.

Connecting to the Network

Use Unshielded Twisted Pair (UTP) Ethernet cable only.
1. Insert one end of the UTP cable into the network connector until the connector snaps securely into the receptacle.
2. Either connect the other end of the cable to an RJ-45 jack wall outlet or to an RJ-45 port on a UTP concentrator or
hub in the network.
Cabling Restriction for Networks
The following restrictions should be observed for 10/100BASE-TX networks:
The maximum cable run length is 100 meters(m) (328 feet[ft]).
Note: Consult Windows manual and / or Novell Netware user's guide for the software installation,
configuration, operation of the network.
Prestigio Nobile 1522E 17