Prestigio Nobile 1522E User Manual page 19

Main Setup
Under this menu, you may change system time/date, system memory, and HDD information.
Item Selection / Sub-menu
Time N/A
Date N/A
Info Setup
Under this menu, you may view basic processor and BIOS Version information.
Advanced Setup
Under this menu, you may change POST beep, LAN Remote Boot and UMA Frame Buffer Size.
POST Beep: When enabled, the notebook will beep on POST.
LAN Remote Boot: When enabled, the system can support remote wake-up or boot on LAN.
UMA Frame Buffer Size: See Below.
Item Selection / Sub-menu
UMA Auto
Frame 16MB
Buffer 32MB
Size 64MB
128MB
256MB
Security Setup
Item
Set Supervisor Password
Set User Password
Password on Boot
Using Password Protection
Two Levels of Password Protection are available. The BIOS provides both a Supervisor and a User password. If you try
to activate both passwords, the Supervisor password must be set first.
The passwords activate two different levels of protection:
1. System always asks for password every time it is powered on.
2. System asks for password only when you attempt to enter BIOS utility.
The passwords are encrypted and stored in NVRAM. Make sure you write them down or memorize them. If you lost
the passwords, the computer may need to be sent back to the factory or to an authorized service dealer to reset the
passwords.
Prestigio Nobile 1522E
Description
Type in the current time, in HH:MM:SS format.
Type in the current date, in MM/DD/YY format.
Description
Select [Auto], the system will automatically set the appropriate shared memory
size for the graphic engine. Otherwise, you may choose a fixed size.
Selection / Sub-menu
Exit
Go to Sub Screen
General Help
Description
Install or Change the Password
Install or Change the Password
When enabled, the system will always ask for User
Password on boot
19