Using The Wireless Lan; Connecting To A Wireless Network - Prestigio Nobile 1522W User Manual

Using the Wireless LAN

Depending on your model, an internal mini PCI-E wireless LAN (WLAN) card may have been pre-installed by your
computer manufacturer at the factory. This card allows you to access corporate networks or the Internet in a wireless
environment.
The WLAN features include:
* Peer-to-Peer (Ad-Hoc) and Access Point (Infrastructure) modes support
* WEP (Wired Equivalent Privacy) 64/128-bit data encryption
* IEEE 802.11a/b/g standard compliance
Technology
Stated Maximum Throughput (Mbps)
Data Rates (Mbps)
Band (GHz)
Modulation Technology
NOTE: 802.11g mode is backward compatible with 802.11b mode.
To take advantage of the WLAN feature, make sure that the WLAN driver is installed correctly. (See chapter 6 for details.)
If your WLAN card was provided by your dealer instead of the computer manufacturer, contact your dealer for the
correct driver to use.

Connecting to a Wireless Network

To connect to a wireless network:
1. Make sure that the WLAN radio is on (controlled by Fn+F1).
2. Click Start and then All Programs.
3. Click Intel PROSet Wireless and then Intel PROSet Wireless.
4. If any wireless network is detected, the following window appears on screen.
PRESTIGIO NOBILE 1522W
802.11a 802.11b
54 11
54, 48, 36, 24, 18, 12, 9, 6 11, 5.5, 2, 1
5.15 ~ 5.35 2.412 ~ 2.462
OFDM (Orthogonal DSSS (Direct
Frequency Division Sequence Spread
Multiplexing) Spectrum)
802.11g
54
54, 36, 18, 9
2.4
OFDM (Orthogonal
Frequency Division
Multiplexing)
21