Before Using The Scanner; Important Safety Instructions; Installation Location; Power - Canon imageFORMULA DR-6030C User Manual

Before Using the Scanner

Important Safety Instructions

To ensure the safe operation of this scanner, be sure to read the
safety warnings and precautions described below.

Installation Location

The performance of this scanner is affected by the environment in
which it is installed. Make sure that the location where the scanner is
installed meets the following environmental requirements.
Provide adequate space around the scanner for operation,
maintenance, and ventilation.
100mm
(3.94")
If scanned documents are ejected to the back of the scanner,
provide adequate space behind the scanner for documents ejected
after being scanned.
Avoid installing the machine in direct sunlight. If this is unavoidable,
use curtains to shade the scanner.
Avoid locations where a considerable amount of dust accumulates
as dust may adversely affect the inside of the scanner.
100mm
(3.94")
100mm
(3.94")
Avoid warm or humid locations, such as in the vicinity of a water
faucet, water heater, or humidifier. Avoid locations where ammonia
gas is emitted. Avoid locations near volatile or flammable materials,
such as alcohol or paint thinner.
Avoid locations that are subject to vibration.
Avoid exposing the scanner to rapid changes in temperature. If the
room in which the scanner is installed is cold but rapidly heated,
water droplets (condensation) may form inside the scanner. This
may result in a noticeable degradation in scanning quality. The
following conditions are recommended for optimal scanning
quality:
Room temperature: 10 °C to 32.5 °C (50 °F to 90.5 °F)
Humidity: 20% to 80% RH
Avoid installing the scanner near equipment that generates a
magnetic field (e.g. speakers, televisions, or radios.)

Power

Connect only to a power outlet of the rated voltage and power
supply frequency. (either 120 V, 60 Hz or 220-240 V, 50/60 Hz
depending on your region)
Do not use a power supply that is not rated for the specified voltage.
Doing so might cause fire or electric shock.
Do not connect other electrical equipment to the same power outlet
to which the scanner is connected. Also, when using an extension
cord, make sure that the extension cord is rated for the current
requirements of the scanner.
The power cord may become damaged if they are often stepped on
or if heavy objects are placed on them. Continued use of a
damaged power cord can lead to an accident, such as a fire or
electrical shock.
Do not use the power cord while it is coiled.
Do not pull directly on the power cord. When disconnecting the
power cord, grasp the plug and remove it from the outlet.
Keep the area around the power plug clear of objects so that the
power cord can be disconnected easily in an emergency.
14