Advertisement
Exit Needle
Remove the pod holder
assembly and detach the
funnel. Locate the exit
needle on the inside bottom
of the K-Cup® pod holder.
Insert a straightened paper
clip into the exit needle to
loosen any coffee grounds.
Entrance Needle
Lift the brewer handle and locate the entrance
needle on the underside of the lid. To clean both
holes in the needle, hold the brewer handle in the
upward position and with your other hand,
carefully insert a straightened paper clip into both
holes. Gently move it around to loosen any coffee
grounds. Lower the handle completely and run
two water-only brew cycles. Do not insert a
K-Cup® pod.
CAUTION: There are sharp needles that puncture
the K-Cup® pod above the K-Cup® pod holder and
in the bottom of the K-Cup® pod holder. To avoid
risk of injury, do not put your fingers in the K-Cup®
pod holder.
Coffeehouse taste
in your own home.
FIND YOUR PERFECT POD
With over 70 brands and hundreds
of varieties, find your match at
keurig.com/new
Have questions? We're here to help. Visit keurig.com/new for troubleshooting
videos, maintenance recommendations, and the full Use & Care Guide.
Still need help? Give us a call at 1-866-901-BREW (2739)
DC0000001136 REV E
Advertisement
