Advertisement
Before You Brew
Plug & Place
Remove packing tape from brewer and plug into
a grounded outlet.
Place a large mug (12oz minimum) on the drip
tray plate.
Auto Off
Strong
Add Water
Rinse & Fill
Remove the water reservoir lid, then lift the reservoir
straight up to remove it.
If you have a Keurig® Water Filter, install it now. Refer
to your Water Filter Starter Kit for instructions.
Rinse reservoir with fresh water and fill to the
MAX fill line.
Replace water reservoir, making sure the lock tab
engages with the brewer. Replace lid.
NOTE: Do not use distilled water.
Auto Off
Strong
Add Water
Advertisement
