Correcting Computer Images - Epson PowerLite 830p User Manual

Epson PowerLite 830p
Note: The image will be slightly smaller after adjusting. If it's
important to maintain the correct aspect ratio, use the menu
system to perform keystone correction, then use the remote's
button to adjust the aspect ratio.
Resize
Press the button on the remote control, select the
Menu
menu, and press
Setting
select and press
Keystone
press , then select
Enter
Select (for vertical keystone distortion) or
V-Keystone
(for horizontal keystone distortion) and press
Keystone
. Use the pointer button on the remote control to
Enter
adjust the keystone setting as needed.
Using Quick Corner
If your projected image has no parallel sides, you can even up
the sides using Quick Corner. Follow these steps:
1. Press the button on the remote control (or on the
Menu
projector's control panel).
2. Select the menu and press
Setting
Note: If you are already using Keystone settings, you see a
warning message. To disable keystone settings and use Quick
Corner instead, press
Enter
3. From the Setting menu, select
4. Select and press
Quick Corner
You see this screen:
8 Epson PowerLite 830p
-
Keystone
buttons
. From the Setting menu,
Enter
, select
Enter H/V Keystone
and press
Horiz./Vert./Height
.
Enter
; to keep your settings, press
and press
Keystone
.
Enter
5. Press the
adjust.
6. Use the
and
arrow buttons on the projector) to adjust the shape.
.
Enter
Note: If you are not satisfied with the corrections made, press
H-
the
Esc
shape.
7. Repeat steps 5 and 6 as needed to adjust any remaining
corners.
8. When you're done, press the
control or projector's control panel to exit the menu
system.
If
Quick Corner
Quick Corner screen appears whenever you press the
projector's keystone buttons. You can then follow steps 5
through 8 above to correct the shape of your image or press
to exit Quick Corner.
Esc
.
Esc

Correcting Computer Images

.
Enter
If you're connected to a computer and the image doesn't look
right, press the
Note: You must be projecting an image for this button to have any
effect. The
Auto
10/04
button to select the corner you want to
Enter
pointer button on the remote control (or the
button for one second to reset the screen to its original
button on the remote
Esc
remains selected in the Keystone menu, the
button on the remote control.
Auto
button works only with computer images.