Installing The Software; Software Supplied; Installing - Epson PowerLite 825 Operation Manual

Installing the Software

Installing the Software
To use the Network functions, install the software from the supplied
CD-ROM (either "EPSON Projector Software for Meeting &
Monitoring" or "EPSON Projector Software for Monitoring") onto your
computer.

Software Supplied

You can find the following software on the CD-ROM. For system
requirements information about this software, see s
• EMP NS Connection
Software for sending computer screen images to a connected projector
via a network connection.
• EMP Monitor
Software that lists the current status of Epson projectors connected to
the network, and monitors and controls those projectors. You can
collectively manage multiple projectors by using EMP Monitor.

Installing

Make sure you check the following points before starting installation.
• If the computer you are using is running Windows XP, Vista, or 2000
you must be logged on as the Administrator when installing.
• Make sure that you close all running applications before starting
installation.
q
Make sure you are using EMP NS Connection Ver. 2.51. If you are using an
older version, it may not be able to connect to the projector correctly. Make
sure you install EMP NS Connection Ver. 2.51 from the "EPSON Projector
Software for Meeting & Monitoring" CD-ROM supplied with your
projector.
Procedure
For Windows
A
Turn on your computer.
B
Insert the CD-ROM into your computer.
The installer starts automatically.
C
Click "Easy Install".
p.68
To select software and install it individually, select Custom Install.
To change the language in which the software is displayed, click
Language.
D
Check the applications to be installed, and then click
"Install".
E
When the License Agreement screen is displayed, click "Yes".
F
When the Add-Remove EPSON Virtual Display screen is
displayed, click "OK".
To use Multi-screen display you need to set up EPSON Virtual Dis-
play. If you do not want to set it up now, you can do so later.
s
G
Click "Exit" to complete the installation.
When EMP Monitor is selected, software is installed sequentially.
For Macintosh
A
Turn on your computer.
B
Insert the CD-ROM into your computer.
p.24
8