Network Settings Are Not Restored After Cutting The Connection To The Computer With Emp Ns Connection; Cannot Project With Quick Wireless Connection (When Using The Optional Quick Wireless Connection Usb Key) - Epson PowerLite 825 Operation Manual

Troubleshooting
Error Messages
Cannot start this application while EPSON USB Display is
running.
Cannot start this application while Quick Wireless
Connection is running.
Cannot connect to the projector using this version of EMP
NS Connection. Install the latest version of EMP NS
Connection.
Network settings are not restored after cutting the
connection to the computer with EMP NS Connection.
Check
Are you manually connecting to a Wireless LAN when the
computer starts up?
Quick Connection Mode
Cannot project with Quick Wireless Connection (When
using the optional Quick Wireless Connection USB Key)
Check
Is the Wireless LAN unit connected?
For Wireless LAN
Is the projector turned on?
Is the projector information stored in the USB Key?
Is the USB Key connected to the computer?
Close USB Display and then start EMP NS Connection.
Close Quick Wireless Connection and then start EMP NS Connection.
Install the latest version of EMP NS Connection.
Try connecting to the Wireless LAN manually.
Check that the optional Wireless LAN unit is securely connected.
Turn on your projector.
First store the projector information in the USB Key, then connect the USB Key to your computer.
Connect the USB Key to the computer. If the USB Key is already connected, disconnect once and then
reconnect it. If projection fails even then, the information stored in the USB Key may have been
erased. Contact Epson. See your User's Guide for more information.
Remedy
Remedy
Remedy
65