Adjust The Virtual Display - Epson PowerLite 825 Operation Manual

Easymp software for multimedia projector

Hide thumbs Also See for PowerLite 825:

Table of Contents

Using Multi-Screen Display

Adjust the Virtual Display

After starting EMP NS Connection, the setup of the virtual displays

varies between Windows and Macintosh. The procedures are explained

separately below.

Check the following points before starting EMP NS Connection when

connecting via Wireless LAN. If the following points are not set correctly,

Multi-screen display cannot be used.

• The SSID for the computer and each projector must be the same.

• The Wireless LAN system for the computer and each projector's Wireless

LAN card must be the same.

You can modify the SSID and Wireless LAN system for the projector from

the Network menu in the projector's configuration menu. See your User's

Guide for more information.

Procedure

For Windows

Select "Start" - "Programs" (or All Programs) - "EPSON

Projector" - EMP NS Connection to start EMP NS Connection.

Select the "Use multi-display" check box.

Display layout and Display properties are added at the bottom of

the screen.

Table of Contents

Do you have a question about the PowerLite 825 and is the answer not in the manual?