Fault List Lavina ® 32R-S - lavina 32R-S-E User Manual

Superabrasive
FAULT LIST LAVINA
Fault
The display does not
work
The display of the
panel lights and then
turns off
No connection with
the machine.
Connection indicator
shows no connection
The machine does
not fulfill commands
The main motor
does not start.
Upon command
„forward" или
„backward" the
machine turns one
side.
No water feed.
Owner's Manual – Lavina
®
32R-S-E
Additional conditions
Push emergency stop button
The panel is not connected to
the machine with a cable
Discharged batteries indicator is
on
Switch „Battery/Network" is in
condition "Battery" .
The „Ready" light is off.
Switch „Battery/Network" is in
"Network" position.
The „Ready" light is off.
The "Power" light is off.
Light „Ready" flashes. Indication
„Emergency Stop"
Light „Ready" flashes. Indication
„Inverter Fault"
Switch „Battery/Network" is in
"Battery" position.
The „Ready" light is on.
The "Power" light is off.
After a while the machine stops
and an indication
„Inverter Fault"
Main motor is not on.
®
32R-S-E
Cause
Panel turned off
No battery . Batteries
are not put correctly.
Discharged batteries
Lack of
damaged battery
discharged battery.
No power supply in the
network.
Unplugged or damaged
feeding cable.
Emergency
pushed.
Protection
inverter I1,I2 or I3
The machine
power supplied.
Overloaded inerter for
shows movement .
Condition for
supply
24
Action
Release the emergency stop
button clockwise
Put charged batteries in the
panel or connect it with a
cable
Put charged batteries in the
panel or connect it with a
cable
battery, Switch „Battery/Network" to
or „Network".
Check
battery condition.
Check for
Check and
change the cable.
stop is Release the emergency stop.
on into Slow down the rev . Switch
„Reset Inverter"
is not Switch „Battery/Network" in
position „Network".
Plug the feeding cable in the
circuit.
Switch „Reset Inverter"
water Turn on the main motor
11/2014
connection and
power supply.
if necessary