Epson PowerLite 755c User Manual page 57

5. Check your wireless card's or adapter's device settings.
(Depending on the type of card or adapter you're using, some of
the settings may be different than those listed here.)
Set the Network Type to
Set the SSID to match the name you assigned to the
projector's ESSID.
Make sure Encryption is
6. Click the
General
adapter is enabled.
7. When you're done, click
Now you're ready to connect to the projector. See "Projecting
Wirelessly" on page 74.
Setting Up Your Macintosh for Ad Hoc Mode
Your AirPort software is automatically configured to allow your
Macintosh to detect both computer-to-computer (Ad Hoc) and
Access Point networks.
Typically, you only need to select your projector's ESSID from the
AirPort status menu on the Macintosh menu bar. If you're having
problems detecting the projector, follow these steps:
1. From the Apple pull-down menu, select
2. Double-click the
Network
window.
802.11 Ad Hoc
.
Disabled
tab and make sure that your wireless card or
to close the Properties dialog box.
OK
System Preferences
icon. You see the Network settings
.
.
Presenting Through a Wireless Network
57