Viewing Lamp Usage And Other Information; Solving Projector Operation Problems - Epson PowerLite 755c User Manual

Viewing Lamp Usage and Other Information

Use the Info menu to view information about the display settings of
your computer and the number of hours the lamp has been used.
Press the button and highlight the
Menu
You see the lamp usage hours and various input signal settings on the
right.
The life span of the lamp is about 2000 hours if the
setting in the Setting menu is set to
Control
3000 hours if the
Brightness Control
sure you have a spare lamp handy if the usage hours on this menu
are close to the life span of your lamp.

Solving Projector Operation Problems

The power doesn't turn on.
If the projector doesn't turn on when you press the P
button, make sure the power cable is connected to the projector
and plugged into a working electrical outlet.
The power cable may be defective. Disconnect the cable from the
outlet and contact Epson as described on page 166.
The buttons on the projector don't work.
If the Operation Lock function has been enabled, you can't use the
buttons on the projector. Try using the remote control instead. See
page 119 for information about the Operation Lock function.
You hear the projector's fan after the power has been turned
off.
If is set to
Standby Mode
after the projector has cooled down. See page 120 for more
information about this setting.
menu.
Info
High
setting is set to
, the fans continue to operate
Network ON
Brightness
(default), and
. Make
Low
Power
note
The information displayed
depends on the input signal
currently selected.
Solving Problems
155