Drive Specifications - Seagate Skyhawk ST2000LV000 Product Manual

2.0

Drive Specifications

Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the
drive and this drive are used throughout this manual to indicate the following drive models:
The specification summaries listed in the following tables are for quick reference. For details on specification measurement or definition, refer to the
appropriate section of this manual.
Table 1 Drive Specifications Summary
Drive Specification
(1)
Formatted capacity
Guaranteed sectors
Heads
Disks
Bytes per sector
Recording density
Track density
Areal density
Spindle speed
Maximum sustained data rate, OD read
Interface
ATA data-transfer modes supported
Cache buffer
Height (mm/in)
Width (mm/in)
Length (mm/in)
Weight (g/lb) max
Average latency
Startup current, Max (+5V)
Voltage tolerance (including noise)
Non-Operating (Ambient °C)
Operating temperature
Temperature gradient
Relative humidity
Relative humidity gradient (max)
Wet bulb temperature
Altitude, operating
Altitude, non-operating
(below mean sea level, max)
Operational Shock
Seagate SkyHawk Product Manual, Rev. A
ST2000LV000
2TB
3,907,029,168
4
2
512 (logical) / 4096 (physical)
2276 Kb/in
580 Ktracks/in avg
1320 Gb/in
5400 RPM
140 MB/s
SATA 6Gb/s
PIO modes 0–4
Multiword DMA modes 0–2
Ultra DMA modes 0–6
128 MB
7.0 (± 0.2) / 0.276 (± 008)
69.85 (± 0.25) / 2.750 (± 0.010)
100.35 (+0.20/-0.25) / 3.951 (+0.008/-0.010)
90 / 0.198
5.6 ms
1.0 A
5V ± 5%
–40° to 70°
0° to 60°
20°C per hour max (operating)
35°C per hour max (non-operating)
5% to 95% (operating)
5% to 95% (non-operating)
30% per hour
37.7°C max (operating)
40.0°C max (non-operating)
–304.8 m to 3048 m (–1000 ft to 10,000+ ft)
–304.8 m to 12,192 m (–1000 ft to 40,000+ ft)
400 Gs at 2 ms max
ST1000LV000
1TB
1,953,525,168
2
1
2
avg
6