Sending Message (Massages) Or Images (Pict); Sending Massages Or Images; Creating And Sending A New Message - Yaesu FTM-100DE Instruction Manual

Sending MESSAGE (Massages) or Images (PICT)

Send messages or images using the GM function.
There are the following three ways for sending messages or images.

(1) Creating and sending a new message

(2) Replying to the sender of the checked message or image data
(3) Forwarding the checked message or image data

Sending massages or images

You can send messages or images from the transceiver. Sent data can be viewed by all
stations operating in digital mode on the same frequency.
There are the following three ways for sending messages or images.
(1) Creating and sending a new message
(2) Replying to the sender of the downloaded message or image data
(3) Forwarding the downloaded message or image data
Creating and sending a new message
Create a new message and send.
1
Press and hold
Displays the "DG-ID SETUP" screen.
2
Press , (
Displays the "LOG SELECT" screen.
3
Rotate the DIAL to select [GM
press .
Displays the "GM MESSAGE" screen.
4
Rotate the DIAL to select [NEW], then press
5
Press (
Displays the message entry screen.
for over one second.
appears on the left side)
MESSAGE], then
appears on the upper side).
.
9