Technical Specification - Apelson UBINDECO60BZ User Manual

Failur e Displa y an d Inspection
I f an abnormalit y come s up , th e inductio n ho b will ente r th e protectiv e stat e
automaticall y an d displ ay correspondin g protectiv e codes:
Error
Message
No pot or pot not suitable;
ER03
Water or pot on the glass over the control
The connection between the display board and the
left mainboard is fail (the cooking zone which
F1 E
indicator showing "E")
Coil temperature sensor failure. (the cooking zone
F3 E
which indicator showing "E")
Mainboard temperature sensor failure. (the cooking
F4 E
zone which indicator showing "E")
Temperature sensor of the ceramic glass plate is
E1 E
high
Temperature sensor of the IGBT is high
E2 E
Abnormal supply voltage(too high)
E3 E
Abnormal supply voltage (too low)
E4 E
Temperature sensor failure(the cooking zone which
E5 E
indicator showing "E")
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and
damages to the induction hob and please contact the service department.

Technical Specification

Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size L×W×H(mm)
Building-in Dimensions A×B (mm)
Weight and Dimensions are approximate. Because we continually strive to
improve our products we may change specifications and designs without prior
notice.
Possible Cause
18
What to do
Replace the pot;
Clean the user interface
1.Connection cable not correctly plugged or
defective;
2.Replace the Mainboard.
Replace the coil sensor
Replace the mainboard
Please restart after the induction hob cools
down.
Please restart after the induction hob cools
down.
Please inspect whether power supply is normal;
Power on after the power supply is normal.
Please inspect whether power supply is normal;
Power on after the power supply is normal.
Connection cable not correctly plugged or
assemble defective;
UBINDECO60BZ
4 Zones
220-240V~
6400W
590X520X58
565X495